Service Area

Installed a battery backup sump pump and primary pump.

I was called to a home to repair a leaky faucet. Upon arrival, I discovered that the faucet was not the issue. The problem was a broken pressure relief valve. I replaced the valve and capped off the line to prevent any further leaks. The homeowner was grateful for my quick and efficient service.

I was called to a home to repair a broken pipe in the kitchen. I arrived at the house and found that the pipe had been crushed by a heavy object. I used a pipe wrench to remove the damaged section of pipe and then replaced it with a new section of pipe. I also repaired any damage to the walls and flooring that had been caused by the pipe burst.

I repaired a Rheem 50-gallon gas water heater that was not heating water properly. After diagnosing the issue, I replaced the faulty thermocouple with a new one and cleaned the burner assembly to ensure efficient operation. I then tested the system for proper ignition and confirmed that the water heater was functioning normally, restoring hot water to the home.

I performed a drain cleaning on a clogged kitchen sink using a Ridgid K-45 drain auger. The clog was caused by a buildup of grease and food particles. After carefully snaking the drain, I removed the blockage and flushed the line with hot water to clear any remaining debris. The sink now drains properly, and there are no further obstructions.

I conducted electronic leak detection using an AccuTrak VPE ultrasonic leak detector. The homeowner reported a persistent water stain on the ceiling. After a thorough inspection, I pinpointed the leak in a copper pipe joint within the wall. I marked the location and provided the homeowner with options for repair, ensuring minimal disruption to the property.

I installed a new Bradford White 40-gallon electric water heater, replacing an outdated unit. The installation involved connecting the new water heater to the existing electrical supply and water lines, securing all connections, and testing the system for leaks. I also set the thermostat to the recommended temperature for optimal energy efficiency. The installation was completed to code, and the system is functioning properly.

I located a hidden leak under a concrete slab using a FLIR thermal imaging camera and electronic leak detection equipment. The homeowner noticed an unexplained increase in their water bill. After pinpointing the exact location of the leak, I provided the homeowner with repair options, including a reroute or a slab penetration, to fix the damaged pipe.

I cleared a main sewer line blockage using a General Pipe Cleaners Speedrooter 92. The blockage was caused by tree roots infiltrating the line. I used a cutting head to remove the roots and restored normal flow to the sewer system. After clearing the blockage, I recommended a follow-up inspection with a camera to assess the condition of the pipe and prevent future issues.

I repaired an AO Smith gas water heater that was experiencing intermittent hot water issues. The problem was traced to a malfunctioning gas control valve. I replaced the valve with a new OEM part, ensuring compatibility and safe operation. After completing the repair, I tested the water heater, confirming consistent hot water delivery and proper burner operation.

I unclogged a bathroom sink drain using a Milwaukee M12 drain snake. The blockage was caused by hair and soap buildup in the P-trap. After removing the clog, I cleaned the drain and reassembled the P-trap, ensuring everything was tightly sealed. I tested the sink, and it now drains efficiently with no signs of further obstruction.

I detected a slow leak in a PEX water line using an ultrasonic leak detector. The homeowner had noticed a musty odor and dampness in their basement. After locating the source of the leak, I shut off the water supply, cut out the damaged section of the PEX tubing, and installed a new piece with SharkBite fittings. The repair was tested, and no further leaks were detected.

I replaced an old electric water heater with a new Rheem Performance Plus 50-gallon unit. The installation required updating the electrical wiring to accommodate the new heater's requirements and replacing the water supply lines with FlexiBraided connectors. After securely mounting the heater, I filled the tank, checked for leaks, and tested the unit to ensure proper heating. The new system is running efficiently, providing consistent hot water.

I was tasked with unclogging a kitchen sink using a small k-50 drain machine. The sink was clogged with a mixture of grease, food particles, and hair. I inserted the drain machine into the sink and turned it on, which created a powerful suction that quickly cleared the clog. Afterward, I flushed the sink with hot water to ensure that the drain was completely clear.

I replaced a 50-gallon electric water heater for a customer. The old unit was leaking and had to be replaced. I removed the old unit, installed the new one, and made sure it was working properly. I also tested the water pressure and temperature to ensure it was safe for use.

I replaced an old 50-gallon electric water heater with a new one that the homeowner had purchased. I removed the old unit and disposed of it properly. I then installed the new unit and connected the water and gas lines. I tested the unit to ensure it was working properly and made any necessary adjustments. I also cleaned up the work area and removed all debris.

I was called to a home in the suburbs to replace a sump pump and check valve. The sump pump was located in the basement and was not working properly. I removed the old pump and check valve and installed a new one. I also checked the electrical connections and made sure everything was working properly. The homeowner was very pleased with the work and thanked me for my help.

I was called to a home to unclog a kitchen sink drain. I used a k-50 to snake out the drain. I was able to remove the clog and the customer was happy with the service.

I am a highly skilled and experienced home service professional. I recently completed a job that involved installing a whole house filter, changing out a leaking gauge on a well pressure tank, and replacing a frost-proof hose bib with a new one. The job required careful attention to detail and the ability to work efficiently to ensure that the job was completed on time and to the customer's satisfaction.

I replaced a leaking 50-gallon water heater with a 50-gallon Rheem Gladiator smart water heater. I also installed a pan with the water heater.

The homeowner was experiencing low water pressure after running a fixture for a few seconds. We diagnosed the issue and found that the pressure reducing valve needed to be replaced. We also replaced the sump pump and check valve as preventative maintenance.

We replaced the 23 year old sump pump and check valve. We also replace a cracked section of discharge piping and secured piping to prevent movement when pump turns on.

I was called to a home to investigate a suspected leak in the bathroom above the kitchen. Upon arrival, I noticed water dripping from the ceiling above the shower. I investigated further and found that the leak was coming from the shower head itself. I removed the shower head and replaced it with a new one, and the leak was fixed.

I received a call from a customer who reported two slow drains in their home. The first drain was in the bathtub, and the second was in the bathroom sink. I arrived at the customer's home and began to investigate the issue. The bathtub drain was slow because there was a lot of hair and soap scum buildup in the pop-up waste. I used a drain machine to clear the stoppage, and the bathtub drain was flowing smoothly again. The bathroom sink drain was slow because there was a lot of hair and grease buildup in the sink's drain. I used a drain machine to clear the stoppage, and the sink dra

Performed a gas line repair using a CSST (corrugated stainless steel tubing) system. Located the leak with a RIDGID micro CD-100 gas detector and replaced the damaged section with TracPipe CSST. Ensured all connections were secure and used gas-rated Teflon tape for added safety. Conducted a pressure test to verify there were no leaks and that the gas line was operating safely. Proper gas line maintenance and repairs are crucial for home safety. For professional gas line services, contact us for reliable and efficient solutions.